Network Stack Configuration - Gigabyte G292-Z42 User Manual

Hpc server - 2u dp 8 x gen4 gpu server (microchip solution) hpc server - 2u dp 8 x gen3 gpu server
Hide thumbs Also See for G292-Z42:
Table of Contents

Advertisement

5-2-10 Network Stack Configuration

Parameter
Network Stack
Ipv4 PXE Support
Ipv4 HTTP Support
Ipv6 PXE Support
Ipv6 HTTP Support
PXE boot wait time
Media detect count
Description
Enable/Disable the UEFI network stack.
Options available: Enabled/Disabled. Default setting is Enabled.
Enable/Disable the Ipv4 PXE feature.
Options available: Enabled/Disabled. Default setting is Enabled.
Enable/Disable the Ipv4 HTTP feature.
Options available: Enabled/Disabled. Default setting is Disabled.
Enable/Disable the Ipv6 PXE feature.
Options available: Enabled/Disabled. Default setting is Enabled.
Enable/Disable the Ipv6 HTTP feature.
Options available: Enabled/Disabled. Default setting is Disabled.
Wait time in seconds to press ESC key to abort the PXE boot.
Press the <+> / <-> keys to increase or decrease the desired values.
Number of times the presence of media will be checked.
Press the <+> / <-> keys to increase or decrease the desired values.
- 63 -
BIOS Setup

Advertisement

Table of Contents
loading

This manual is also suitable for:

G292-z40

Table of Contents