Advertisement
Quick Links
GFDSR241
GFDSL241
GFDSR242
GFDSL242
Outdoor Beer Dispensing Equipment
Installation and Instruction
24" SINGLE FAUCET BEER DISPENSER SOLID DOOR RIGHT HINGE
24" SINGLE FAUCET BEER DISPENSER SOLID DOOR LEFT HINGE
24" DOUBLE FAUCET BEER DISPENSER SOLID DOOR RIGHT HINGE
24" DOUBLE FAUCET BEER DISPENSER SOLID DOOR LEFT HINGE
Manual
P/N 011028 rev A
Form. No. Z2425
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for hestan GFDSR241
Summary of Contents for hestan GFDSR241
- Page 1 Outdoor Beer Dispensing Equipment Installation and Instruction Manual GFDSR241 24” SINGLE FAUCET BEER DISPENSER SOLID DOOR RIGHT HINGE GFDSL241 24” SINGLE FAUCET BEER DISPENSER SOLID DOOR LEFT HINGE GFDSR242 24” DOUBLE FAUCET BEER DISPENSER SOLID DOOR RIGHT HINGE GFDSL242 24” DOUBLE FAUCET BEER DISPENSER SOLID DOOR LEFT HINGE P/N 011028 rev A Form.
- Page 2 Allow only properly trained and credit without our approval. experienced personnel to handle high pressure gas. We thank you again for selecting a high quality Hestan Beer Dispenser. Cheers! Do not apply oil to the regulator! WARNING INSTALLATION OF DISPENSING EQUIPMENT NOTE: Wash tapping devices thoroughly.
- Page 3 HESTAN RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT INSTALLATION OF DISPENSING EQUIPMENT Open the tapping kit box and become familiar with its components. The instructions on pages 4 through 8 will demonstrate how to properly install the tapping equipment on your new Hestan Beer Dispenser.
- Page 4 HESTAN RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT Locate the dispensing head , black beer line(s), and hose clamp(s). Slide one end of each beer line onto the stainless steel tubes which protrude out the bottom of the dispensing head and clamp tight.
- Page 5 HESTAN RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT Install the Air Scoop Kit. Start by removing the upper set of screws located above the fan on the back wall of the cabinet. Assemble components from the kit as follows – Insert...
- Page 6 HESTAN RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT If installing a two faucet system, a CO2 manifold will need to be installed. Locate the red CO2 lines, CO2 manifold and a #10 x 1/2” sheet metal screw. Slide one end of each hose onto the barbed fittings on the manifold and clamp.
- Page 7 HESTAN RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT On the right rear sidewall there is a double column of screws. Remove the left screw. Locate the safety chain and a #10 x 1/2” sheet metal screw from the parts bag.
- Page 8 HESTAN RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT Before tapping, make sure the beer faucet is closed. To tap a keg, insert the coupler into the neck of the barrel. Turn the coupler clockwise until it stops (about an 1/8 turn), then push down on the top of the coupler and again turn clockwise until it stops.
-
Page 9: Mounting Hole Template For Draft Arms
HESTAN RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT MOUNTING HOLE TEMPLATE FOR DRAFT ARMS hestanoutdoor.com... - Page 10 Use and Care Guides, Specification Sheets, Wood Overlay Templates for Doors, Drawers and Grilles, and Corresponding Compliance and Energy Guides are available for download at http://www.hestanoutdoor.com/ Contact Hestan Customer or Technical Service at 888-905-7463 Customer Service and Technical Service are available business days Monday through Friday from 8 a.m.
Need help?
Do you have a question about the GFDSR241 and is the answer not in the manual?
Questions and answers