Acer Power SD Service Manual page 30

The command line at the bottom of the menu tells you how to move within a screen and from one screen to
another.
To select an option, move the highlight bar by pressing
To change a parameter setting, press
Press
exit Setup.
The parameters on the screens show default values. These values may not be the same as those in your
system.
The grayed items on the screens have fixed settings and are not user-configurable.
NOTE: Due to the application of a new version of BIOS Setup program, you may find the BIOS menu is largely
different from the former models. However, you will soon find out that this version is much more
compact than the former ones.
Chapter 2
to return to the main menu. If you are already in the main menu, press
or
or until the desired setting is found.
then press .
again to
25