Unicomp Labs Echo236F User Manual page 39

2.2.6 DVI-I Connector
The DVI-I connector on the front panel supports both DVI and VGA display
modes. This connector can output DVI signals. The DVI output mode supports
up to 1920x1200 resolution. The DVI mode is automatically selected according
to the display device connected. You will need a DVI-I cable when connecting to
a display device. The VGA output mode supports up to 1920x1200 resolution.
If use VGA function will need a DVI-I to VGA module connecting to DVI-I device.
Below is the DVI-I to VGA module picture:
2.2.7 DisplayPort
Onboard Display Port support auxiliary channel dual mode, connection supports
up to 4096x2304 resolution at 60 Hz.
©Echo-236F User Manual
Reset
SIM 1 SIM 2
1 2 3
SIM 3
WLAN
CFast
Reset
SIM 1 SIM 2
1 2 3
SIM 3
WLAN
CFast
HDD
DVI-D
DP
DVI-I
PWR
HDD
DVI-D
DP
DVI-I
PWR
GETTING TO KNOW YOUR Echo-236F
LAN 2 LAN 1
LAN 2 LAN 1
32