Table of Contents
Advertisement
4.4.4 Memory Information
Figure 4-4-4: Memory Information
Displays memory information.
4.4.5 PCH-IO Configuration
Figure 4-4-5: PCH-IO Settings
PCH LAN Controller
Enable or disable onboard NIC.
Wake on LAN
Enable or disable integrated LAN to wake the system. (The wake On LAN
cannot be disabled if ME is on at Sx state.)
Serial IRQ Mode
Configure serial IRQ mode.
State After G3
Specify what state to go to when power is re-applied after a power failure (G3 state).
BIOS AND DRIVER SETTING
97
Advertisement
Table of Contents
