Advertisement
SELF-PRIMING PORT
SELF-PRIMING PORT
SELF-PRIMING PORT
SELF-PRIMING PORT ABLE ELECTRIC PUMP
SELF-PRIMING PORT
1.
This electric pump cart is to be used in conjunction with an electric ground fault
interrupt. This unit is not supplied with a ground fault interrupt. Make sure the
electrical outlet you are using is supplied with a ground fault interrupt!
2.
Fill vacuum hose with water and attach to the suction assembly.
3.
Connect fresh water supply to priming valve on pump.
4.
Open priming valve allowing pump strainer to fill with water.
5.
Once the strainer is full pump can now be turned on. Never run pump dry!
This will damage the seals and the electric motor.
6.
Once pump is in operation the priming valve can be closed.
7.
If you have a problem with the pump priming check all fittings and vacuum hose
for leaks. If the pump motor hums and does not turn over please contact cus-
tomer service.
If you have any questions on the assembly or operation of this unit please contact
customer service at 1-800-437-8072.
Recreation Supply Co., Inc.
P.O. BOX 2757 • BISMARCK, ND 58502 • (800) 437-8072 • FAX (800) 850-0262
PRIMING INSTRUCTIONS
PRIMING INSTRUCTIONS
PRIMING INSTRUCTIONS
PRIMING INSTRUCTIONS
PRIMING INSTRUCTIONS
ABLE ELECTRIC PUMP
ABLE ELECTRIC PUMP
ABLE ELECTRIC PUMP
ABLE ELECTRIC PUMP
Advertisement
