Preparation For Use - Echo CS-501P Operator's Manual

CS-501P

Preparation For Use

Saw chain is sharp! Always wear gloves when handling
assembly, otherwise serious personal injury may result.
Note: The machine may be delivered with guide bar, and saw chain
separated. Install guide bar, optional Kick Guard
chain as follows.
Instructions to Install Optional Kick Guard
Tools Needed: Two 11 mm (7/16 in.)
Wrenches.
1. Install bolt (A) in rear hole (B) of optional
TM
Kick Guard
in guide bar.
2. IMPORTANT: Dimple (D) in optional
TM
Kick Guard
guide bar.
3. Securely tighten nut (F) and bolt (A).
Guide Bar and Saw Chain Installation / Removal
1. Disconnect spark plug lead.
2. Unlock chain brake (A).
3. Remove sprocket guard nuts (B)
and remove sprocket guard (C).
X7503312804
© 01/20 ECHO Incorporated
and through front hole (C)
must engage recess (E) in
DESCRIPTION
TM
TM
to Bar
Optional
A
TM
Kick Guard
D
E
C
F
C
, and saw
B
A
B
23