Summary of Contents for Campania International San Pietro FT-17
Page 1
FT-17 San Pietro Fountain Assembly Instructions Fountain Information: • Three people are recommended for the installation of this fountain! • This fountain holds approximately 20 gallons of water. • This fountain uses a medium fountain cover: FTNCOV-MED • Compatible with #7 Refill Device and LED kit •...
Page 2
FT-17 San Pietro Fountain Assembly Instructions Three people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
Page 3
FT-17 San Pietro Fountain Assembly Instructions Step 7 - Place the pump cover (FT-17C) over the pump. Step 8 - Feed the tubing connected to the pump through the top of the pump cover (FT-17C). FT-17C (75 lbs) 10"W x 19.5"H Step 9 - Connect the 1/2"...
Page 4
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.