3.6.3 Reference Settings
The Reference Settings subtab is plit into two pages (Figure 14) and it allows the
user to select and prioritize input references for the M212.
3.6.3.1 Reference Settings Page 1
Table 5. MCM Input Reference Settings Page 1 Setting Descriptors
SETTING
CrossLink Ref-A
CrossLink Ref-B
HaveQuick
GPS
IRIG-B
Figure 14. MCM Reference Settings Page 1
Available Refs
Displays Yes when the M212's MCM is receiving time via
the optical crosslink over port A.
Displays Yes when the M212's MCM is receiving time via
the optical crosslink over port B.
Displays Yes when the M212's MCM is receiving time via
HaveQuick.
Displays Yes when the M212's MCM is receiving time via
GPS.
Displays the IRIG-B Signal format the M212 is receiving if it
is receiving time of day via IRIG-B
30
MANUAL P/N 900000178 REV B
DESCRIPTION