Gigabyte C246-WU4 User Manual page 12

Table of Contents

Advertisement

Line In/Side Speaker Out (Blue)
The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
Line Out/Front Speaker Out (Green)
The line out jack. This jack supports audio amplifying function. For better sound quality, it is recommended
that you connect your headphone/speaker to this jack (actual effects may vary by the device being used).
Mic In/Side Speaker Out (Pink)
The Mic in jack.
Audio Jack Configurations:
Jack
Center/Subwoofer Speaker Out
Rear Speaker Out
Line In/Side Speaker Out
Line Out/Front Speaker Out
Mic In/Side Speaker Out
• If you want to install a Side Speaker, you need to retask either the Line in or Mic in jack to be Side
Speaker out through the audio driver.
• To enable or configure the audio amplifying function for the Line out jack, please access the HD
Audio Manager application.
• When removing the cable connected to a back panel connector, first remove the cable from your
device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
Please visit GIGABYTE's website for details on configuring the audio software.
Headphone/
4-channel
2-channel
a
a
a
- 12 -
5.1-channel
7.1-channel
a
a
a
a
a
a
a
a

Advertisement

Table of Contents
loading

Table of Contents