HSS Hire 58121 Operating & Safety Manual

Familiarise yourself with the switches and their location
so that you can operate them quickly in an emergency.
All that remains is to plug the Vacuum into its power
supply and switch the supply ON.

BASIC TECHNIQUES

Always position yourself so you can control the
vacuums whereabouts while ensuring that neither the
hose or the power supply cable are under strain.
Move the wand backward in straight strips across
the floor, working in a methodical pattern to ensure the
entire area is vacuumed.
Some heads can have their brush retracted when
working on smooth surfaces, to do this simply depress
the retraction lever.
The first section of the wand has a black plastic collar
which will allow you to reduce the vacuum power to
70 %, simply turn to show an opening in the tube.
This first section also enables you to change the
height of the wand assembly depending on which
way round it is set.
If required you can fit the round brush either to the
end of the wand or directly to the end of the hose
Take your time and don't overdo it. You are more
likely to have an accident if you are tired or rushing.

EQUIPMENT CARE

Never push the equipment beyond its design
limits. If it will not do what you want with reasonable
ease and speed, assume you have the wrong size model
for the job. Contact your local HSS Hire Shop for advice.
Keep the equipment clean, you will find this less of a
chore if you clean it regularly, rather than wait until the
end of the hire period.
Check the debris bag at regular intervals and
replace as necessary, following the instructions in
'GETTING STARTED'.
Remember, it is your responsibility to dispose of any
debris in a responsible manner.
Handle the equipment with care. Avoid dropping it,
knocking it, or otherwise exposing it to damage.
When not in use, store the equipment somewhere
clean, dry and safe from thieves.

FINISHING OFF

Switch OFF and unplug the vacuum.
Disconnect the head, wand and hose. Remove the
debris bag and replace the motor unit.
Collect all the parts together, neatly coil the flex
and give the tool a final clean up ready for return,
to your local HSS Hire Shop.
Contact your local
0990 282828
...any comments?
If you have any suggestions to enable us to improve
the information within this guide please fax your
comments or write to the Product Manager at the
address below
Fax: 0181-687 5001
©HSS Hire Service Group Plc 1998 No. 850/01
Group Office: 25 Willow Lane, Mitcham, Surrey CR4 4TS
Web Site: http://www.hss.co.uk
Operating & Safety Guide 850
Hire Shops
Medium-Duty
Vacuum
A medium sized vacuum, ideal for
larger offices shops and commercial
premises.
Code 58121