VARIOUS CONFIGURATIONS Configurations ..................27 - 43 ACCESSORIES Fit Envy raincover ................... 44 - 45 Fit bootcover ....................46 CARE AND MAINTENANCE Care and maintenance ................47 CONTACTS Customer service ..................48 017396, 017398 - Envy Stroller - 12 - 16...
Do not run or jog with this stroller. The Envy 4 Wheel Stroller has been approved in accordance with AS/NZS 2088:2013. The weight of the child using this stroller should not be more than 17kg (approximately 4 years of age). Shopping basket capacity should not be more than 3kg. The weight of the child using the infant carrier should not be more than 9kg.
Page 4
Components Supplied Frame (x1) Seat Unit (x1) Mudguards (x2) Rear Wheels with Front Wheels with Never Flat Tyres (x2) Never Flat Tyres (x2) Rear Adaptors (x2) Front Adaptors (x2) 017396, 017398 - Envy Stroller - 12 - 16...
• The weight of the child using the Bassinet should not be more than 9kg. • Please refer to instruction manuals of the One Safe Infant Carrier, Maxi-Cosi Infant Carrier, and Safety 1st Bassinet for full weight and height specifications.
Page 7
• This vehicle is designed for use on flat or gently sloping surfaces and may be unstable on higher sloping and uneven surfaces. You should always be aware of the possibility of the stroller tipping on uneven or higher sloping surfaces. 017396, 017398 - Envy Stroller - 12 - 16...
Page 8
(Figure 2d). • Never Flat tyres do not require air. The tyres are maintenance free. PRESS 017396, 017398 - Envy Stroller - 12 - 16...
Page 9
• To remove the wheels, press the buttons on top inside of the wheel posts and pull wheel away from stroller (Figure 3b). • Never Flat tyres do not require air. The tyres are maintenance free. 017396, 017398 - Envy Stroller - 12 - 16...
Page 10
Then press the button (C) as per Figure 5b. • Then lift out the seat with both hands, as per Figure 5c. • LIFT WARNING Do not use this seat with any other models of stroller. 017396, 017398 - Envy Stroller - 12 - 16...
Page 11
Figure 6c & 6d. Note: To remove the canopy. Lift up canopy release lever (C) and slide the canopy off the mounting bracket, as per Figure 6b. Repeat for other side. OPEN 017396, 017398 - Envy Stroller - 12 - 16...
At the same time slide the handle either up or down to your desired position release the button and allow the handle to lock into position, as per Figure 8b. PRESS 017396, 017398 - Envy Stroller - 12 - 16...
Page 13
TO ADJUST THE RECLINE ANGLE OF THE SEAT Press and hold the buttons on both sides, as per Figure 10a. • Adjust the seat to the desired angle, as per Figure 10b. • PRESS 017396, 017398 - Envy Stroller - 12 - 16...
Page 14
TO ADJUST THE FOOTREST • Press and hold the buttons on both sides of the footrest simultaneously. Adjust the footrest to the desired angle. See Figure 12a & 12b. • PRESS (both sides) ADJUST 017396, 017398 - Envy Stroller - 12 - 16...
(F and G). Pull straps to ensure they are locked into the buckle assembly. 4. The harness should resemble this image. 5. The buckle is released by squeezing the top and bottom prongs together until harness disengages. (Figure 5). SQUEEZE 017396, 017398 - Envy Stroller - 12 - 16...
Page 16
• Whenever a child is in the stroller and brakes are not engaged, the large loop should be around your wrist, as per Figure 15. 017396, 017398 - Envy Stroller - 12 - 16...
Page 17
Figure 16b. Avoid holding the stroller in other locations to avoid injury from moving parts. OPENING STROLLER • Lift storage latch to release, as per Figure 16b. • Unfold stroller by lifting handle until the locking mechanism engages. 017396, 017398 - Envy Stroller - 12 - 16...
Page 18
Insert the bassinet into the frame, as per Figure 17a. • Listen for ‘CLICK’, as per Figure 17b. • • Your stroller with bassinet is now ready for use. CLICK! CORRECT POSITION INCORRECT POSITION 017396, 017398 - Envy Stroller - 12 - 16...
Page 19
SLIDER WARNING STRAP GUARD Secure the child in the harness at all times. Please refer to the instruction manual of the Safety 1st Bassinet for full coverage of features 017396, 017398 - Envy Stroller - 12 - 16...
Page 20
& adjustment instructions for your Infant Carrier, please consult your instructions supplied with your Infant Carrier. ONE SAFE ONE SAFE INFANT CARRIER INFANT CARRIER ADAPTOR ADAPTOR CLICK! CORRECT POSITION INCORRECT POSITION 017396, 017398 - Envy Stroller - 12 - 16...
Page 21
(A) and press button (B), as per Figure 21b. Then remove the adaptor, as per Figure 21c. Press the button (C) as per Figure 21d. Repeat for other side. LIFT PRESS 017396, 017398 - Envy Stroller - 12 - 16...
Page 22
(A) and press button (B), as per Figure 22b. Then remove the adaptor, as per Figure 22c. Press the button (C) as per Figure 22d. Repeat for other side. LIFT PRESS 017396, 017398 - Envy Stroller - 12 - 16...
Page 24
To remove the front adaptors. Slide and hold down button (A) and press button (B), as per Figure 23b. Then remove the adaptor, as per Figure 23c. Press the button (C) as per Figure 23d. Repeat for other side. ‘CLICK’ 017396, 017398 - Envy Stroller - 12 - 16...
Page 25
Repeat for other side. Note: To remove the adaptors. Pull the adaptors release lever (A) in then slide the adaptor up and off the frame, as per Figure 24b. Repeat for other side. 017396, 017398 - Envy Stroller - 12 - 16...
Page 26
To remove the adaptors. Slide and hold down button (A) and press button (B), then remove the adaptor, as per Figure 25b. Press the button (C), then remove the other side adaptor as per Figure 25b. Maxi-Cosi One Safe ‘CLICK’ 017396, 017398 - Envy Stroller - 12 - 16...
Configurations FITTING ONE SEAT (Forward Facing) • Insert the seat posts into the frame. Listen for ‘CLICK’. • • For further instruction regarding installation please refer to page 10. ‘CLICK’ 017396, 017398 - Envy Stroller - 12 - 16...
Page 28
Configurations FITTING ONE SEAT (Rearward Facing) • Insert the seat posts into the frame. Listen for ‘CLICK’. • • For further instruction regarding installation please refer to page 10. ‘CLICK’ 017396, 017398 - Envy Stroller - 12 - 16...
Page 29
Configurations FITTING ONE BASSINET • Insert the seat posts into the frame. Listen for ‘CLICK’. • • For further instruction regarding installation please refer to pages 18-19. ‘CLICK’ 017396, 017398 - Envy Stroller - 12 - 16...
Page 30
For further instruction regarding installation please refer to page 21 (for One Safe), or 22 (for Maxi-Cosi). MAXI-COSI ONE SAFE INFANT CARRIER INFANT CARRIER INFANT CARRIER INFANT CARRIER ADAPTOR FOR ADAPTOR FOR MAXI-COSI ONE SAFE ‘CLICK’ ‘CLICK’ 017396, 017398 - Envy Stroller - 12 - 16...
Page 31
Insert the adaptors followed by the seats into the frame. Listen for ‘CLICK’. • • For further instruction regarding installation please refer to pages 24 & 25. ‘CLICK’ FRONT ADAPTOR ‘CLICK’ ‘CLICK’ REAR ADAPTOR 017396, 017398 - Envy Stroller - 12 - 16...
Page 32
Insert the adaptors followed by the seats into the frame. Listen for ‘CLICK’. • • For further instruction regarding installation please refer to pages 24 & 25. ‘CLICK’ FRONT ADAPTOR ‘CLICK’ ‘CLICK’ REAR ADAPTOR 017396, 017398 - Envy Stroller - 12 - 16...
Page 33
Insert the adaptors followed by the seats into the frame. Listen for ‘CLICK’. • • For further instruction regarding installation please refer to pages 24 & 25. ‘CLICK’ FRONT ADAPTOR ‘CLICK’ ‘CLICK’ REAR ADAPTOR 017396, 017398 - Envy Stroller - 12 - 16...
Page 34
Insert the adaptors followed by the bassinets into the frame. Listen for ‘CLICK’. • • For further instruction regarding installation please refer to pages 24 & 25. ‘CLICK’ FRONT ADAPTOR ‘CLICK’ ‘CLICK’ REAR ADAPTOR 017396, 017398 - Envy Stroller - 12 - 16...
Page 35
Insert the adaptors followed by the bassinets into the frame. Listen for ‘CLICK’. • • For further instruction regarding installation please refer to pages 24 & 25. ‘CLICK’ FRONT ADAPTOR ‘CLICK’ ‘CLICK’ REAR ADAPTOR 017396, 017398 - Envy Stroller - 12 - 16...
Page 36
Insert the adaptors followed by the bassinets and seat into the frame. Listen for ‘CLICK’. • • For further instruction regarding installation please refer to pages 24 & 25. ‘CLICK’ FRONT ADAPTOR ‘CLICK’ ‘CLICK’ REAR ADAPTOR 017396, 017398 - Envy Stroller - 12 - 16...
Page 37
Insert the adaptors followed by the seat and bassinets into the frame. Listen for ‘CLICK’. • • For further instruction regarding installation please refer to pages 24 & 25. ‘CLICK’ FRONT ADAPTOR ‘CLICK’ ‘CLICK’ REAR ADAPTOR 017396, 017398 - Envy Stroller - 12 - 16...
Page 38
Insert the adaptors followed by the seat and bassinets into the frame. Listen for ‘CLICK’. • • For further instruction regarding installation please refer to pages 24 & 25. ‘CLICK’ FRONT ADAPTOR ‘CLICK’ ‘CLICK’ REAR ADAPTOR 017396, 017398 - Envy Stroller - 12 - 16...
Page 44
Figure 26b. Attach 2 velcro loops on each side of frame, as per Figure 26a. • WINDOW AT FRONT ELASTIC VELCRO LOOP VELCRO LOOPS 017396, 017398 - Envy Stroller - 12 - 16...
Page 45
Attach 5 velcro tabs on raincover around the back of the seat (Figure 27c, 27d • & Figure 27e). STORAGE LATCH BOLT WINDOW AT FRONT SLIDE ELASTIC TO TOP OF FRAME VELCRO LOOPS 017396, 017398 - Envy Stroller - 12 - 16...
Page 46
Figure 28b. Attach press stud, as per Figure 28c & 28d. • • Repeat for both sides. VELCRO TOGGLES PRESS STUD 017396, 017398 - Envy Stroller - 12 - 16...
Ensure fabric is dry before storing. • Occasionally clean and lubricate wheels with a light lubricating oil. • Regularly check for loose parts and tighten when required. • Damaged or broken parts should be immediately replaced. 017396, 017398 - Envy Stroller - 12 - 16...