CMOS Reset Button
The CMOS reset button located on the rear of the system, is powered by a battery on board to keep the
system configuration data. The CMOS RAM records the correct time and setting of system hardware
configuration. With the CMOS RAM, the system can automatically boot OS every time it is turned on. If you
want to clear the system configuration, use the CMOS reset button to clear data.
To clear the CMOS RAM:
NOTE: Make sure the system is powered off before performing the following instruction.
1.
Turn off the system and all the peripherals connected to it.
2.
Press the CMOS reset button located on the rear of the system. Refer to "Rear Panel" on page 6 for the
location of the CMOS reset button.
86
Chapter 5