JetAir JASA18HP230V1AD Owner's Manual page 18

OPERATING INSTRUCTIONS
I-FEEL MODE
The indoor unit will sense room temperature at the wired Tether Controller instead of at the
return air section of the indoor unit.
I-Feel Settings
Press the Function button until the I-Feel icon is displayed, then press Enter/Cancel to
activate the function.
Turn Unit On.
F
F
Press Function until the I-Feel icon is displayed.
Outdoor unit
Outdoor room sensor
Cancel I-Feel Mode
To cancel, press Function button to re-enter the
I-Feel settings, then press Enter/Cancel button.
Indoor Unit Room Sensor A
Tether Controller Indoor Room Sensor B
Indoor unit
Press Enter/Cancel to start I-Feel mode.
17