Thank you for purchasing a MAKINEX product. This manual provides information and procedures to safely operate and maintain the GEN-6P Generator. For your own safety and protection from injury, carefully read, understand and observe the safety instructions described in this manual.
MAKINEX SUPPORT +61 2 9460 8071 MODEL NO. GEN-6P SERIAL NO. DATE OF PURCHASE PURCHASE LOCATION ABOUT THIS MANUAL This manual uses the following symbols to help differentiate between different kinds of information. The safety symbol is used with a key word to alert you to potential hazards in operating and owning power equipment.
Read this manual thoroughly before operating your generator. Failure to follow instructions could result in WARNING serious injury or death MAKINEX GEN-6PGenerator designed for professional operators only, instruct operators in care WARNING and use of the machine before use! GENERAL SAFETY PRECAUTIONS DANGER ...
Page 6
RISK OF EXPLOSION OR FIRE Fuel and its vapours are extremely flammable and explosive DANGER Fire or explosion can cause severe burns or death ALWAYS switch the engine OFF when refuelling. ALWAYS refuel away from any source of heat. ...
Page 7
RISK OF ELECTRICAL SHOCK Risk of electrocution. WARNING ALWAYS store the generator undercover when not in use and away from damp or wet conditions. NEVER use the generator outdoor when it is raining or snowing or in wet or damp conditions.
PRODUCT SPECIFICATIONS GENERATOR: MAX OUTPUT 6kVA FREQUENCY 50Hz VOLTAGE 240V MAX OUTPUT 4800W RATED OUTPUT 3900W 2 X 15A SINGLE PHASE SOCKETS WITH RCBO SOCKETS PROTECTION WEIGHT 74 kg NOISE LEVEL (7M) NO LOAD - 70dB 50% LOAD - 72dB 100% LOAD - 74dB RATED POWER FACTOR...
OVERALL MACHINE DIMENSIONS FEATURES FEATURES Durable Galvanised frame Multi cushion isolators for vibration reduction Compact design for easy storage and transport Lifting point for transportation RFL permanent magnet alternator Page 10 of 22...
OPERATION BEFORE USE 1. Add Engine Oil (New machines will be pre-oiled from MAKINEX) 1.1 Place generator on a flat, level surface. 1.2 Clean area around oil fill and remove oil fill cap. 1.3 Using oil funnel (optional), slowly pour contents into oil fill opening.
Page 12
WHEN ADDING FUEL TO GENERATOR, OBSERVE THE FOLLOWING STEPS: 2.0 Always ensure that fuel tanks are filled outdoors. 2.1 Turn generator OFF and let it cool for at least two minutes before removing fuel cap. 2.2 Loosen fuel cap slowly to release pressure. 2.2 Slowly add unleaded gasoline to fuel tank.
OPERATING GENERATOR STARTING THE ENGINE 1. Remove all connections from the AC sockets. 2. Open the fuel valve. 3. Turn the STOP SWITCH to the ‘ON’ position. 4. If you are starting the generator in low temperature conditions, close the choke lever fully.
MAINTENANCE GENERAL RECOMMENDATIONS: Regular maintenance will improve the performance and extend the life of the generator. The generator’s warranty does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain the generator as instructed in this manual and in the engine manual, including proper storage.
STORAGE Long term storage instructions (fuel in tank) Gasoline fuel can become stale when stored over 30 days. Stale fuel causes acid and gum deposits to form in the fuel system or crucial carburettor parts. To keep fuel fresh, add a fuel stabiliser liquid additive to fuel. The fuel stabiliser is available at most auto parts stores.
LIMITED WARRANTY In order to take advantage of the MAKINEX limited warranty, you must have maintenance performed according to the schedule (contained in relevant owner’s manual supplied with this product), by an authorised MAKINEX dealer or MAKINEX service technician. You are...
Page 17
It is the consumer’s responsibility to deliver the machine in question to our service premises or to the premises of our appointed agent at the consumer’s expense for replacement or repair as applicable. Claim Procedure: Contact MAKINEX by phone or email informing us of your machines problem or defect. Page 17 of 22...
Page 18
All warranties will be carried out by MAKINEX authorised staff or appointed agents at a premises to be determined by the Manufacturer. It is the responsibility (and cost) of MAKINEX or our appointed agent to return the machine to be repaired or replaced under warranty to the consumer- this is valid for domestic territories only (e.g.
Page 19
AUS: 1300 795 953 or +61 2 9460 8071 USA: 407-446-1996 EUROPE: +31 (0)6 24881203 or +31 (0)6 50841849 Or your nearest MAKINEX distributor We have very knowledgeable, experienced staff to assist you with help and advice. Page 19 of 22...