Summary of Contents for Campania International Vence FT-312
Page 1
FT-312 Vence Wall Fountain Assembly Instructions Fountain Information: • Three people are recommended for the installation of this fountain! • This fountain holds approximately 20 gallons of water. • This fountain uses a large fountain cover: FTNCOV-LG • Compatible with #10 Refill Device and LED kit •...
Page 2
FT-312 Vence Wall Fountain Assembly Instructions Three people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
Page 3
FT-312 Vence Wall Fountain Assembly Instructions Step 10 - Place the pump cover (FT-312F) over the pump and tubing. Step 11 - Let the silicone set for 24 hours before filling the fountain with water. FT-312F (28 lbs) 9"L x 5"W x 20.75"H...
Page 4
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.