Installing Lp Gas Tank; Insert Lp Gas Tank; Secure Lp Gas Tank; Connect Lp Gas Tank - Uniflame GAD1391 Series Owner's Manual

Lp gas outdoor fireplace
Table of Contents

Advertisement

Contact 1.800.762.1142 for assistance. Do not return to place of purchase.
9
Place Glass Rocks
Caution: Do NOT dump glass rocks out of package. Carefully
place glass rocks by hand so dust does not clog burner.
Caution: Do NOT cover pilot housing.
Note: Glass rocks should be 0.4-1.2 in. (1-3 cm) long. Approx. 14.5 lbs. (6.6 kg) of
glass rocks are needed.
10
Place Lava Rocks and Logs (sold separately)
Caution: Do NOT dump lava rocks out of package. Carefully
place lava rocks by hand so dust does not clog burner.
Caution: Do NOT cover pilot housing.
Note: Lava rocks should be 0.8-2.0 in. (2-5 cm) long. Approx. 9.92 lbs. (4.5 kg) of
lava rocks are needed.

Installing LP Gas Tank

To operate you will need (1) precision-filled standard grill LP gas
tank (20#) with external valve threads.
Note: An empty standard grill LP gas tank weighs approximately
18 lbs. A precision-filled standard grill LP gas tank should weigh
no more than 38 lbs.
Caution: LP gas tank must be properly
disconnected and removed prior to moving this
grill.
Need a tank of gas? Try tank exchange service. It's easy, fast, safe, and
available at tens of thousands of conveniently located retail outlets na-
tionwide. You can purchase a new full tank or exchange your empty for a
precision filled one.

Insert LP Gas Tank

WARNING: Make sure LP gas tank valve is closed. Close by turning
valve clockwise.
Place precision filled LP gas tank upright into hole in the base of the outdoor fireplace so it is
arranged for vapor withdrawal.

Secure LP Gas Tank

Secure tank by sliding tank retainer chain around the LP gas tank and insert peg into LP gas
tank tray.
Note: Peg must be inserted into LP gas tank when tank is in LP gas tank tray.

Connect LP Gas Tank

Before connecting, be sure that there is no debris caught in the
head of the LP gas tank, head of the regulator valve or in the
head of the burner and burner ports.
Connect regulator/hose assembly to tank by turning knob
clockwise until it stops.

Disconnect LP Gas Tank

Before disconnecting make sure the LP gas tank valve is
"CLOSED".
Disconnect regulator/hose assembly from LP gas tank by
turning knob counterclockwise until it is loose.
Caution: LP gas tank must be properly
disconnected and removed prior to moving
this grill.
page no.
7
20 lb
9 Kg
12.2 in. / 31 cm

Advertisement

Table of Contents
loading

Table of Contents