Technical Data - Namron TOUCH Z-WAVE 16A Instruction Manual

INSTRUCTION MANUAL
Namron termostat touch Z-Wave 16A

Technical data

Z-Wave frequency
Operation voltage
Maximum load
Power consumption
Ambient temperature
Temperature range
Hysteresis
Floor sensor
Floor sensors supported
Control modes
Control types
IP rating
Relative humidity
Standard
Certificate
868.42MHz (EU)
220-240V, 50/60Hz
16A
<2W
0°C to 40°C (during operation)
0°C to 40°C
0.5°C to 2°C (default 0.5°C)
NTC R25=10K±1%@25°C, B25/50=3950K±1%, (3m included)
NTC R25=10K±1%@25°C, B25/50=3950K±1% (factory setting)
NTC R25=15K±1%@25°C, B25/50=3950K±1%
NTC R25=50K±1%@25°C, B25/50=3950K±1%
NTC R25=100K±1%@25°C, B25/50=3950K±1%
1. Away 2. Auto 3. Manual 4. Drying 5. Off
Room sensor (factory default)
Floor sensor
Room + floor sensor
This parameter can also be configured through advance config parameter 10
IP21
8% to 80%
EN 60730-1:2016;A1, EN IEC 60730-2-9:2019;A1
EN IEC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019,
EN 60730-1:2016+A1:2019,
EN 60730-2-19:2019+A1:2019+A2:2020,
EN 50663:2017;ETSI EN 301 489-1V2.2.3,
ETSI EN301 489-3V2.1.1 ETSI EN300 220-1 v3.1.1.,
ETSI EN300 220-2 V3.2.1
RED:2014/53/EU
Z-Wave plus, CE, RED
81mm
28.4mm 21.3mm