Table of Contents
Advertisement
5.
Take out the microphone from the middle cover.
6.
Remove the two screws fastening the launch board.
7.
Then remove the launch board from the middle cover.
.
8.
Remove the screw holding the keyboard.
9.
Turn over the keyboard as shown.
10. Disconnect the keyboard cable.
11. Remove the keyboard from the main unit.
12. Tear off the tapes fastening the wireless antenna cable.
13. Pull the antenna set from the main unit.
14. Disconnect the LCD cable.
15. Turn over the notebook then remove two screws fastening the LCD module.
70
Chapter 3
Advertisement
Table of Contents
