OPERATING INSTRUCTIONS
Using the Control Panel: (see Figure 3)
G UP
F DOWN
Power(Figure 3.A):
Push button to turn on or turn off. If OFF, all functions (except timer) will be restored at the next power ON.
✦
Unplugging the unit will reset all functions.
✦
Flame Button (Figure 3.B):
Press to activate the flame function. This button controls the brightness of flame and ember effect.
✦
When the fireplace is first turned on, the flame will come on at the highest setting; press DOWN or UP button to
✦
adjust the brightness of flame.
There are 6 levels you can cycle through, including the OFF setting (the ember remains on).
✦
When adjusting the flame brightness with UP and DOWN button, the number of the FLAME LEVEL corresponds to
✦
the 5 brightness levels.
When this feature is on, digital display will display the number of the flame level.
✦
Heater Control (Figure 3.C):
Press to activate the heater function. The system will start the temperature setting at 80°F.
✦
There are 7 adjustable heat levels, ranging from 60°F to 80°F.
✦
Press the DOWN or UP button to adjust the temperature by 5°F.
✦
When this feature is on, digital display will display the number of the heat level.
✦
And when this feature is off, the inner blower will continue to run for additional 30 seconds to cool down the unit in
✦
order to protect the heating elements before the unit completely shuts off.
You can switch the temperature display from Fahrenheit to Celsius by pressing and holding the HEATER button on
✦
control panel for approximately 3 seconds. Without any adjustments after approximately 3 seconds, the digital display
will show the room temperature.
Timer Control (Figure 3.D):
Press once to activate. Press UP and DOWN button to adjust the timer.
✦
The choices are 30Min, 1H, 2H, and to 8H with 1 H interval.
✦
Once the timer is on and the desired setting is reached, the system will shut down.
✦
Child Lock (Figure 3.E):
Press and hold the button for 3 seconds to activate the function. When the CHILD LOCK is on, all the other features
✦
are disabled.
Press and hold the button again for 3 seconds to unlock the function.
✦
Down(Figure
3.F):
Use to turn down the heat, brightness of lame or timer.
✦
When FLAME / HEATER / TIMER is not activated, this button will not work.
✦
Up (Figure 3.G):
Use to turn up the heat, brightness of flame or timer.
✦
When FLAME / HEATER / TIMER is not activated, this button will not work.
✦
E C
D TIMER
HILD
LOCK
Figure 3
PAGE 4 OF 8
C HEATER
B FLAME
A POWER
ITEM# F15-I-005-009
MODEL# 15IN-23-100