Adjusting User Settings On The Tkp-7500 - Universal Remote Control TOTAL CONTROL TKP-7500 Owner's Manual

TKP-7500 I -W N C T
N ALL ETWORK OLOR OUCHSCREEN

Adjusting User Settings on the TKP-7500

By pressing and holding the Main and Mute buttons for 5 seconds
(found in the Core Menu) simultaneously the TKP-7500 Settings
Menu will appear.
Simultaneously press both the Main and Mute buttons to activate
the Settings Menu.
Settings Menu
The Settings Menu allows you to adjust some basic parameters of
the TKP-7500 keypad.
Select these options by pressing the appropriate icon. If no
icon/button is pressed for 45 seconds, the unit will revert back to
the Main screen.
The Settings Menu is broken down into the following categories:
Sleep Settings: Manages how long the LCD remains ON after
usage.
General: Contains settings for Time, Date and Temperature Scale
Sound: Allows control of any confirmation beeps, or the ability
to disable these tones.
Brightness: Easily adjust the LCD screen's brightness level, and
enable/disable the light sensor.
Vibration: Adjust the touch screen's vibration sensitivity.
System: Quickly view the Memory Usage, Firmware Version
and other details about the TKP-7500.
Network: View information about the current network as well
as set a Dynamic or static IP address for the TKP-7500.
Factory Default: Reset the TKP-7500 to factory settings.
Page 5