Advertisement
Rear spacers
The rear of your new appliance will have either an exposed
condenser (Fig.1) or a concealed condenser, or a 'flat back' (Fig.2)
Your appliance may come supplied with spacers fitted to the rear or you
may be supplied with two plastic spacers similar to those shown in Fig.3a
or 3b. Fit these to the rear of the appliance as shown (Fig.3a & 3b).
When fitted, the spacers will ensure an air gap between the condenser
and the rear wall.
If your appliance does not come supplied with spacers fitted or you are not
supplied with plastic spacers to fit yourself, ensure a gap of 50mm is
maintained behind condenser and the rear wall.
Fig.1
Fig.3a
Fig.3b
8
Fig.2
Advertisement
