Advertisement
Reversing the doors
4.6.
The door opening can be reversed from "right hand hinged" to "left
hand hinged" if required.
Warning! When reversing the door, the appliance must not be connected to the mains.
Remove the plug from the mains beforehand.
Remove Plastic cap from top hinge assembly.
-
Remove the screws and upper-hinge assembly then lift and remove the fridge
-
door away from the middle hinge assembly. Now remove the hinge pin from
the upper hinge, turn the hinge over and refit the pin into the same hole.
Remove the screws and middle hinge assembly then lift the freezer door
-
away from the lower hinge assembly.
Remove the screws, lower hinge and foot assembly. Now remove the hinge
-
pin from the lower hinge, turn the hinge over and refit the pin into the same
hole. Remove the left foot and refit on the right-hand side.
-
Now fit the lower hinge and foot assembly to the left-hand side. Tighten the
-
screws.
Place the freezer door onto the lower hinge and then refit the middle hinge into
-
the pre-drilled holes on the left-hand side of the cabinet. Tighten the screws.
Now place the fridge door onto the middle hinge and then refit the upper hinge
-
into the pre-drilled holes on the left-hand side of the cabinet. Tighten the screws.
Ensure that both doors are correctly aligned and that they seal correctly. If the
-
doors require further alignment, slacken off the screws, re-align the doors then
tighten the screws.
Refit the plastic cap.
-
12
Advertisement
