Airbrush Heaven AS186 User Manual page 7

Setup
Attaching the 3 Way Adaptor
• Place the female end of the 3 way adaptor to the 1/8" connector
on the regulator valve and turn till tight by hand.
Please Note:
To attach additional hoses please remove the end caps. Using more than one
airbrush simultaneously will lower the output pressure from the select pressure.
Attaching the Twin Airbrush Holder
• Unscrew the nut off the base of the regulator valve.
• Slide the twin airbrush holder over the regulator valve and place
into selected position.
• replace a tighten the nut till finger tight against the holder.
After Sales Support
UK/N.IRELAND HELPLINE N
WEBSITE: www.airbrushheaven.co.uk
EMAIL: enquiries@airbrushheaven.co.uk
: 01270 508530
O
5