How To Use - Panasonic CS-E9SD3RW Operating Instructions Manual

How to use

Remote control display
OFF / ON
TIMER/CLOCK
MODE UP SELECT
OFF/ON DOWN SET
CLOCK CANCEL
Press and hold
for approximately
10 seconds to show
temperature setting
in °C or °F.
Not applicable
6
FAN SPEED MODE
QUIET/
TEMP
AIR SWING POWERFUL
AC RC
CHECK RESET
Press to restore the
remote control to
previous setting.
Not used in normal
operations.
FAN SPEED
To select fan speed
(Remote control display)
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
MODE
To select operation mode
AUTO - For your convenience
• Unit selects operation mode every 10 minutes
according to setting temperature and room
temperature.
HEAT - To enjoy warm air
• Unit takes a while to warm up.
COOL - To enjoy cool air
• Use curtains to screen off sunlight and outdoor
heat to reduce power consumption during
COOL mode.
DRY - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
To switch between
QUIET/
POWERFUL
quiet & powerful
QUIET POWERFUL
QUIET: To enjoy quiet operation
• This operation reduces airflow noise.
POWERFUL: To reach temperature quickly
• This operation stops automatically after
Single
20 minutes.
• This operation continuous until
Multi
pressing again
Can be activated in all modes and can be
cancelled by pressing the respective button
again.
Auto Restart Control
• If power is resumed after a power failure, the
operation will restart automatically after a period
of time with previous operation mode and airflow
direction.
• This control is not applicable when TIMER is
set.
Single split system
Single
Multi split system
Multi
NORMAL
QUIET/
POWERFUL
button.