Table of Contents
Advertisement
Preparation
2
Mounting the TV to a Wall
Remove the stand assembly before mounting the TV onto the wall.
1. Remove the 4 screws from the neck of the stand and detach the
stand.
2. This TV is designed to be wall-mounted
with a standard 200 mm x 100 mm
mounting kit (sold separately) designed
for flat-panel TVs. Mount this TV
according to the instructions included
in the mounting kit. Due to space
restrictions, we recommend that you
make all connections before mounting
on to the wall.
• If you are wall mounting your TV you may wish to buy a 90° HDMI adapter. This will help with your cable management.
• Please read this instruction manual carefully while setting up your TV.
• If you require additional assistance please call our Call Centre on (UK) 0344 561 1234 or (Ireland) 1 890 818 575.
Our Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.
Front / Right Side View and Controls
1
Item
1
MULTI FUNCTION SWITCH
2
POWER LED
3
IR (Infrared Receiver)
12
LT-32C672_IB.indd 12
200mm
100mm
Four mounting holes
(size M4 screw)
5-8mm
M4
2
3
Description
Switches the TV into standby and on. Selects modes (channel,volume, and source).
Illuminates when the TV is in standby mode. The LED will blink confirming that a timer
recording programme has started in the standby mode.
Receives IR signals from the remote control.
Do not put anything near the sensor, as its function may be affected.
x4
LAN
VGA
SPDIF
Optic.OUT
SCART
LAN
VGA
SPDIF
Optic.OUT
SCART
26/07/2017 08:13
Advertisement
Table of Contents
