Acer Aspire 7720 Service Manual page 49

The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
System Time
System Date
System Memory
Total Memory
Video Memory
Quiet Boot
Network Boot
F12 Boot Menu
D2D Recovery
Wake-up on LAN
NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is
because the user is not allowed to control the settings in these cases.
Chapter 2
Description
Sets the system time. The hours are displayed
with 24-hour format.
Sets the system date.
This field reports the memory size of the system.
Memory size is fixed to 640MB
This field reports the total memory size in the
system.
Shows the Video memory size.
Determines if Customer Logo will be displayed or
not; shows Summary Screen is disabled or
enabled.
Enabled: Customer Logo is displayed, and
Summary Screen is disabled.
Disabled: Customer Logo is not displayed, and
Summary Screen is enabled.
Enables, disables the system boot from LAN
(remote server).
Enables, disables Boot Menu during POST.
Enables, disables D2D Recovery function. The
function allows the user to create a hidden
partition on hard disc drive to store operation
system and restore the system to factory
defaults.
Enables, disables remote wakeup (power on) via
LAN.
Format/Option
Format: HH:MM:SS
(hour:minute:second) System Time
Format MM/DD/YYYY (month/day/
year) System Date
Enabled
Option: or Disabled
Enabled
Option: or Disabled
Disabled
Option: or Enabled
Enabled
Option: or Disabled
Disabled
Option: or Enabled
43