Pioneer DMH-C5500NEX Operation Manual page 82

TIP
The parking assist guidelines can be displayed temporarily on the rear view camera screen by touching
the icon at the top left of the screen. The guidelines can be adjusted. For details on how to adjust the
guidelines, see [Parking Assist Guide Adjust] (page 83).
▶Camera for Camera View mode
Camera View can be displayed at all times. Note that with this setting, the camera image
is not resized to fit, and that a portion of what is seen by the camera is not viewable.
To display the camera image, touch [Camera View] on the AV source selection screen
(page 30).
NOTES
• To set the rear view camera as the camera for Camera View mode, set [Back Camera Input] to [On]
(page 82).
• When using the 2nd camera, set [AV Input] to [Camera] (page 74).*
• When the camera view of both the rear view camera and 2nd camera are available, the key to switch
the display appears. Touch this key to switch the display between the rear view image and 2nd
camera image.*
* DMH-C5500NEX/DMH-C2550NEX
CAUTION
Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen
image may appear reversed.
• Immediately verify whether the display changes to the rear view camera image when the shift lever is
moved to REVERSE (R) from another position.
• When the screen changes to full-screen rear view camera image during normal driving, switch to the
opposite setting in [Camera Polarity].
• If you touch while the camera image is displayed, the displayed image turns off temporarily.
Menu Item
[Back Camera Input]
[Off] [On]
[Camera Polarity]
[Battery]
[Ground]
Description
Setting rear view camera activation.
Setting the polarity of the rear view camera.
The polarity of the connected lead is positive.
The polarity of the connected lead is negative.
NOTE
This function is available when [Back Camera Input] is set to [On].
- 82 -