Table of Contents
Advertisement
Quick Links
OWNER'S MANUAL
Read and understand this entire owner's manual, including all safety information, before plugging in
WARNING
or using this product. Failure to do so could result in fire, electric shock, or serious personal injury.
Keep this owner's manual in a safe place for future reference. If you sell or give this product away,
CAUTION
make sure this manual accompanies this product.
Pictures within this owner's manual are for reference only. Please refer to the actual product for
NOTICE
appearance.
120V AC; 60 HZ; MAXIMUM POWER 1400 WATTS
ALL ELECTRIC. NO WOOD OR CHARCOAL. NO GAS. NO VENTING REQUIRED.
WALKER
ELECTRIC STOVE HEATER
SKU- EFS15ABLK
Advertisement
Table of Contents
Related Manuals for Flame & Shade WALKER
Summary of Contents for Flame & Shade WALKER
- Page 1 OWNER’S MANUAL WALKER ELECTRIC STOVE HEATER SKU- EFS15ABLK Read and understand this entire owner’s manual, including all safety information, before plugging in WARNING or using this product. Failure to do so could result in fire, electric shock, or serious personal injury.
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS! WARNING Read these instructions carefully before using this heater! • • This heater is hot when the heat mode is in use. To avoid burns, DO NOT let bare skin touch hot surface. If provided, always use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater, and keep them away from the sides and rear. - Page 3 WARNING • For residential use only! NOT for commercial use! Any commercial or public use of this heater voids all warranties , and could cause injury. • This product is not intended to be a primary heat source. It is for supplemental heat only. •...
-
Page 4: Tools Needed
PREPARATION This product includes GLASS! ALWAYS use extreme caution when handling glass. NOTICE Failure to do so could result in personal injury or property damage. Make sure all parts are dry, and the power cord and plug are not damaged. NOTICE See IMPORTANT SAFETY INFORMATION on pages 2 and 3. -
Page 5: Installation And Assembly
INSTALLATION AND ASSEMBLY ALWAYS make sure the unit is unplugged before beginning assembly! NEVER NOTICE move or clean the heater, or change the bulb, while it is plugged in. ALWAYS attach the feet before using! NEVER plug in or operate this unit if the feet NOTICE are not securely attached! STEP1: Carefully turn the Stove Heater(A) upside down and lay it on a clean soft surface. -
Page 6: Operation
OPERATION Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in electric shock, fire, serious injury, or death. This heater is not intended to be a primary heat source. It is designed to provide NOTICE supplemental heat, and should not be left running to continuously for more than eight hours. -
Page 7: Control Panel Functions
CONTROL PANEL FUNCTIONS When this heat function is used for the first time, a slight odor may be present. NOTICE This is normal and should not occur again unless the heater is not used for an extended period of time. CONTROLS FUNCTION Main Power... -
Page 8: Care And Maintenance
CARE AND MAINTENANCE ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in electric shock, fire, or personal injury. Cleaning NEVER immerse in water or spray with water. Doing so could result in electric shock, fire, or personal injury. - Page 9 LIGHT BULB MAINTENANCE ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, changing the light bulbs, or moving this unit. Failure to do so could result in electric shock, fire, or personal injury. Light bulbs become very hot during use. Allow at least 10 minutes for the WARNING bulb(s) to cool before touching.
-
Page 10: Troubleshooting Guide
TROUBLESHOOTING GUIDE PROBLEM SOLUTION 1. Make sure the power cord is plugged into a working 120V AC electrical outlet. 2. Check for a tripped circuit breaker, or a blown fuse. There is no power to the unit. 3. If the unit had been working, but then turned off by itself, the temperature limiting control must be reset. -
Page 11: Faq - Frequently Asked Questions
CSA RATING LABEL & POWER CORD LABEL CSA Rating Label Power Cord Warning Label FAQ - FREQUENTLY ASKED QUESTIONS Question Answer Can I leave the heater No. This heater is not intended to be a primary heat source. It is running overnight? designed to provide supplemental heat, and should not be left running continuously for more than eight hours. -
Page 12: Limited Liability
LIMITED LIABILITY This product is not intended to be used as a primary heat source. Read and understand all assembly and operating instructions, and all safety information and warnings before use. in contract, in tort, or on any other basis, for any indirect, special, punitive, exemplary, consequential, or incidental loss, cost, or damage arising out of or in connection with the sale, maintenance, use, or inability to use this product, agents be liable for any direct losses, costs, or damages that exceed the purchase price of the product.