Download Print this page

FORMUFIT External Adjustable Elbow Product Instructions

PRODUCT INSTRUCTIONS

External Adjustable Elbow

FORMUFIT External Adjustable Elbows connect two (2) segments of PVC Pipe and adjusts to

any angle between 90° and 270°. To connect this product to PVC pipe, follow the instructions

shown below.

Assembly

Line up and insert one end of a PVC

Pipe inside of one socket of the

adjustable elbow.

For permanent and strong connections, it is recommended to use PVC cement/solvent to

attach the PVC pipe and the adjustable elbow.

You can also temporarily connect ﬁtting by driving a self-tapping screw where the pipe and

cap meet, or apply electrical tape over the end of the PVC pipe prior to insertion for a

temporary, yet strong connection.

, ®

Push or tap into place until the pipe is

fully seated. Repeat for the next pipe

segment on the opposite side of the

ﬁtting.

https://formuﬁt.com

Table of Contents

Do you have a question about the External Adjustable Elbow and is the answer not in the manual?

Page 1 PRODUCT INSTRUCTIONS External Adjustable Elbow FORMUFIT External Adjustable Elbows connect two (2) segments of PVC Pipe and adjusts to any angle between 90° and 270°. To connect this product to PVC pipe, follow the instructions shown below. Assembly Push or tap into place until the pipe is Line up and insert one end of a PVC fully seated.