Advertisement
Table of Contents
PRODUCT INSTRUCTIONS
PipeClamp™
FORMUFIT PipeClamp™ connects materials such as tarps, netting and cloth materials to PVC
and other types of pipe. To connect this product to PVC pipe, follow the instructions shown
below.
Assembly
1
Lay the material you wish to connect
over the pipe segment. Align the
PipeClamp with the pipe.
Removal
To remove a PipeClamp from a segment of pipe,
simply lift from the bottom of the clamp pull until
one end is released. Pry up the remaining area
of PipeClamp to be removed.
, ®
All rights reserved. TM
& Copyright © 2009-2018 FORMUFIT LC
2
Push the PipeClamp down over the
material and pipe until it is snapped
into place.
https://formufit.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for FORMUFIT PipeClamp
Summary of Contents for FORMUFIT PipeClamp
- Page 1 PRODUCT INSTRUCTIONS PipeClamp™ FORMUFIT PipeClamp™ connects materials such as tarps, netting and cloth materials to PVC and other types of pipe. To connect this product to PVC pipe, follow the instructions shown below. Assembly Lay the material you wish to connect Push the PipeClamp down over the over the pipe segment.
- Page 2 Other Compatible Pipe Materials PipeClamp™ is compatible with more than just PVC pipe. It will also work with a host of other tube-shaped materials, such as metal pipe and wooden dowels. Review the PipeClamp compatibility chart to see what size PipeClamp to use for your application: 1”...
Need help?
Do you have a question about the PipeClamp and is the answer not in the manual?
Questions and answers