Blue Ridge 21TAA-4 Install Manual

FOR: TOYOTA TACOMA ATTIC
Welcome! This installation isn't rocket science but it is kind of like karate - you can hurt yourself or break
something if you don't pay attention. Used properly, this Install Guide will tell you all you need to know
- like Yoda, but with better grammar.
If you have any trouble, contact us for product support: blueridgeoverlandgear.com/pages/contact-us
TOOLS YOU NEED: NEEDLE NOSE PLIERS
p.1
I N S T A L L G U I D E
1
2
Please Note: This product is for 4th generation
Toyota Tacoma's and after (crew cab only)

STEP #1

Locate the 2 hanger hooks on the rear ceiling
of the cab and remove the covers by pulling.
3

STEP #2

Using the needle nose pliers, pinch the metal
clasp inside the hanger hooks. Remove the
hanger hook and also the metal clasp.

STEP #3

Re-insert the metal clasp into the hanger
hooks. Take the included Rear Anchor Tabs
and place them onto the hanger tabs with the
metal clasp through the hole in the fabric.
(CREW CAB ONLY)
NOT
WILL FIT ACCESS CAB
GO TO NEXT PAGE >