DOS Flash Utility
Perform the following steps to use the DOS Flash Utility:
1.
Press F2 during boot to enter the Setup Menu.
2.
Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move
USB HDD to position 1.
Information
Main
Boot priority order:
1. IDE0 : WDC WD1600BEVT-22ZCT0-(S1)
2. IDE1 : HL-DT-STDVDRAM GT10N-(S3)
3. Network Boot : Realtek Boot Agent
4. USB HDD : ABC
5. USB FDD :
6. USB KEY :
7. USB CD/DVD ROM :
↑↓
F1
Help
←→
Esc
Exit
3.
Execute the KAW6xxx.BAT batch file to update BIOS.
The flash process begins as shown.
Chapter 2
PhoenixBIOS Setup Utility
Advanced
Security
Select Item
F5/F6
Select Menu
Enter
Power
Boot
Exit
Use < ↑ > or < ↓ > to
select a device, then
press <F6> to move it
up the list, or <F5>
to move it down the
list. Press <Esc> to
escape the menu.
Change Values
Select Sub-Menu
Item Specific Help
F9
Setup Defaults
F10
Save and Exit
33