Main - Acer Aspire 5515 Service Manual

Main

The Main screen allows the user to set the system time and date as well as enable and disable boot option
and recovery.
Information Main
System Time:
System Date:
System Memory:
Extended Memory:
Video Memory:
Quiet Boot:
Network Boot:
D2D Recovery:
SATA Mode:
↑↓
F1 Help
←→
Esc Exit
NOTE: The screen above is for your reference only. Actual values may differ.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
System Time
System Date
System Memory
Extended Memory
Video Memory
Quiet Boot
Network Boot
D2D Recovery
SATA Mode
Chapter 2
PhoenixBIOS Setup Utility
Advanced Security
[17:02:07]
[09/09/2008]
633 KB
1789 MB
[256MB]
[Enabled]
[Enabled]
[Enabled]
[IDE ACHI]
Select Item F5/F6
Select Menu Enter
Description
Sets the system time. The hours are displayed with 24-
hour format.
Sets the system date.
This field reports the memory size of the system.
Memory size is fixed to 633 KB.
This field reports the memory size of the system.
Memory size is fixed to 1789 MB.
Shows the video memory size.
Displays the logo screen while booting.
Enables, disables the system boot from LAN (remote
server).
Enables, disables D2D Recovery function. The function
allows the user to create a hidden partition on hard disc
drive to store operation system and restore the system
to factory defaults.
Control the mode in which the SATA controller should
operate.
Power Boot Exit
<Tab>, <Shift+Tab>, or
<Enter> selects field.
Change Values
Select Sub-Menu
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Format/Option
Format: HH:MM:SS
(hour:minute:second)
Format MM/DD/YYYY
(month/day/year)
N/A
N/A
256, 128, or 64 MB
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: AHCI Mode or IDE
Mode
23