Final Assembly Checks; Oil Requirements; Tank - Bush Hog RMB 1445 Operator's Manual

FINAL ASSEMBLY CHECKS

1. With the arms at half reach and with the flail head clear of the ground carry out final adjustment of the lift
arm levelling box to bring the main frame horizontal.
2. Tighten check chains and/or stabilizer bars.
3. Carefully operate the machine through its full range of movements while checking that hoses are not under
tension, pinched, frayed, or kinked and that all movements are functioning correctly.
4. Fold the machine into the transport position. The machine is now ready to proceed to the work site.

OIL REQUIREMENTS

Tank

The machine is delivered from the factory without oil. Fill the reservoir with a light hydraulic oil as
recommended in the chart until the oil level is approximately 3" below the top of the tank. The total capacity is
approximately 65 liters (17 gallons). Do not overfill. The oil must have anti-frothing characteristics suitable for
use in hydraulic systems.
Supplier
Castrol
Shell
Mobil
Esso
Texaco
Gulf
B.P.
Dalton
Elf
ISO VG
SAE
RMB 1445 11/10
© 2010 Alamo Group Inc.
ASSEMBLY
Cold or Temperature Climate
Agricastrol hydraulic oil
Hy-spin AWS46
Tellus 46
D.T.E. 25
Nuto "H" or "A" 46
Rando HD 46
Hydrasil 46
Energal HLP 46
Silkolene Dove 46 or
Derwnet 46
Hydrelf 46
46
10W
Assembly Section 3-9
Hot Climate
Hy-spin AWS68
Tellus 68
D.T.E. 26
Nuto "H" or "A" 68
Rando HD 68
Hydrasil 68
Energal HLP 68
Silkolene Dove 68
Hydrelf 68
68
20