PTO SHAFT
Regularly check the PTO guards for damage and ensure the anti rotation chains are in place and that their
anchor points are in good condition.
Make sure the PTO shield, integral driveline shields, and input shields
are installed when using PTO-driven equipment.
shield if it is damaged or missing.
KEEP AWAY FROM ROTATING ELEMENTS to prevent entanglement
and possible serious injury or death.
PTO LUBRICATION
Lubricate the shaft at the points shown below at the intervals indicated using N.L.G.I. #2 Grease.
RMB 1445 11/10
© 2010 Alamo Group Inc.
MAINTENANCE
(S3PT-8)
(SG-24)
Maintenance Section 5-3
Always replace any