Dvd Setup Menu - Sharp LC-24CHG6131KFM Operating Instructions Manual

DVD SETUP
To enter this menu please ensure the TV is in DVD source & press [DVD SETUP]
If you wish to make changes to any of the default settings, use the scroll
To confi rm any settings press [OK] button. To exit this menu at anytime, press [DVD SETUP] button.
TV Display - Choose from the following options:
4:3 Pan scan
4:3 Letter box
Wide
Speaker Setup - Choose from the following options:
LT/RT
Stereo
Dual Mono - Choose from the following options:
Stereo
Mono L
Mono R
Mix Mono
Dynamic Range - This is the difference between the quietest and loudest sounds. This setting only works
with DVD discs recorded in Dolby digital.
Full Set this to listen with the range recorded on the disc
3/4 Set this to listen with a range equivalent to a normal television
1/2 Set this to listen with a smaller difference between the maximum and minimum volume
1/4 Set this to listen with a smaller difference between the maximum and minimum volume
Off Set dynamic range to off
TV Type - Choose from the following options:
PAL
Multi
NTSC
Default - Choose from the following options:
Reset
Note: This TV/DVD player is pre-set to play Region 2 DVDs. In the event you wish to use the TV/DVD
in another country that uses different region discs, please visit www.umc-uk.co.uk. Select 'Product
Support', 'Changing Region'.
42
(For models with built in DVD players)
PS traditional picture format, this is often used with older fi lm formats
LB Traditional picture which has been adapted for widescreen
16:9 Widescreen picture format
Converts from multi-channel sound to mono
Converts from multi-channel sound to stereo
Outputs 2 channels of sound both left and right
Outputs left side sound
Outputs right side sound
Outputs a single channel of sound but mixed between right and left
For TVs produced in the UK,Europe, Asia, Australia etc
For both NTSC and PAL
For TVs produced in North America, Japan etc
Resets all options in the 'DVD setup' menu back to the default settings
DVD Setup
buttons.