Sharp LC-24CHG6131KFM Operating Instructions Manual page 17

CONNECTIONS
Connecting to a USB device
To use the USB input, TV source should be set to USB Media. Tablets and/or phones can
be charged via the USB port but cannot be used to playback media content. TV source should be set to
USB Media.
Note: Tablets and/or phones can be charged via the USB port, however, it is not possible to play back
media from these devices.
Note: Some USB devices may need to be connected to an external power supply before being used with
this input, i.e. powered hard drive.
Connecting the TV to Earphones
When connecting via the TV's 3.5mm earphone output, this will disable the TV speakers.
Connecting to a Satellite Dish
TV source should be set to SAT.
Note: You will need to tune your set into satellite channels after connecting to the dish.
18
OPTION 1 for connection to a USB memory stick to the USB input.
USB
OPTION 2 for connection to an external hard drive to the USB input.
USB
3.5mm
earphone
SAT IN
Connections
Mini
USB