Table of Contents
Advertisement
Quick Links
Owner's Manual and Installation Instructions
GES-NIG25OUT
GES-NIG35OUT
GES-NMG25OUT
GES-NMG35OUT
GES-NMG50OUT
GES-NMG70OUT
GES-NJG25OUT
GES-NJG35OUT
GES-NJG50OUT
............................................... ............................................... ........................................... .1
Procedures............................................... ...................................................................7
Recovery............................................... .............................................................10
Indoor/Outdoor Unit Installation Drawings.......................................................... . . . . . . . . 12
Safety Precautions ............................................... ...........................................................................14
Read Before Installation ....................................... ...................................................................... 18
Installation Procedure........................................... ........................................................................ 2 1
Outdoor Unit Troubleshooting............................... ............................................... . . . . . . . . . . . . . . 26
Write the model and serial
numbers here:
Model # _________________________
Serial #
____________________________
Find these numbers on a label on the front of
the base pan behind the front grille.
GEM-NM40OUT M
GEM-NM50OUT M
. .............................................. ...................................................................3
............................................... ..............................................................7
Requirements.......3
Advertisement
Table of Contents
Related Manuals for GE GES-NIG25OUT
Summary of Contents for GE GES-NIG25OUT
-
Page 1: Table Of Contents
Owner’s Manual and Installation Instructions GES-NIG25OUT GEM-NM40OUT M GES-NIG35OUT GEM-NM50OUT M GES-NMG25OUT GES-NMG35OUT GES-NMG50OUT GES-NMG70OUT GES-NJG25OUT GES-NJG35OUT GES-NJG50OUT Warning ............................1 Loading and Unloading/Transporting Management/Storage Requirements..3 Installation Instructions ........................3 Relocation Procedures........................7 Maintenance Instructions ......................7 Scrapping and Recovery.......... -
Page 2: Warning
Read the precautions in this manual This appliance is filled with R32. carefully before operating the unit. Keep this manual where the user can easily nd it. WARNING: Ask your dealer or qualified personnel to carry out installation work.Do not attempt to install the air conditioner yourself. - Page 3 3 GWP* value=675 parliament, herewith we inform the consumer about the dis- tCO2=(1+2) x 3 /1000 posal requirements of the electrical and electronic products. Outdoor Unit Factory charge (kg) CO2 Equivalent (t) 0.34 GES-NIG25OUT DISPOSAL REQUIREMENTS: 0.62 0.42 GES-NIG35OUT GES-NMG25OUT 0.34 Your air conditioning product is marked with this 0.42...
-
Page 4: Loading And Unloading/Transporting Management/Storage Requirements
Minimum Room Area/m 1.224 1.836 2.448 3.672 4.896 6.12 7.956 0.306 The maximum refrigerant charge amount (M) M kg M kg M kg 0.82 GES-NIG25OUT GES-NMG35OUT GES-NJG25OUT 0.85 0.82 GES-NIG35OUT GES-NMG50OUT GES-NJG35OUT 1.14 GES-NMG25OUT GES-NMG70OUT GES-NJG50OUT 1.3. M kg M kg... - Page 5 ‡ Safety Awareness Procedures: operation shall be made as per controlled procedures to minimize the probability of risks. Area: area shall be divided and isolated appropriately, and operation in an enclosed space shall be avoided. Before the refrigeration system is started or before hot working, ventilation or opening of the area shall be guaranteed.
- Page 6 • Electrical Safety Requirements Note: The surrounding conditions (ambient temperature, direct sunlight and rainwater) shall be noticed during electrical wiring, with effective protective measures being taken. Copper wire cable in line with local standards shall be used as the power line and connector wire. Both the indoor unit and outdoor unit shall be reliably earthed.
- Page 7 Fixation The support of the outdoor unit shall be fixed onto the wall surface, and then the outdoor unit shall be fixed onto the support horizontally. In case the outdoor unit is wall-mounted or roof-mounted, the support shall be firmly fixed, to avoid the damage of strong wind.
-
Page 8: Relocation Procedures
Relocation Procedures Note: in case relocation is required, the joint of evaporator gas/liquid pipes of the indoor unit shall be cut off with a cutting knife. Connection is only allowed after re-flaring (the same to the outdoor unit). Maintenance Instructions Maintenance Precautions Precautions •... - Page 9 Inspection on Maintenance Environment • Before operation, the refrigerant leaked in the room is not allowed. • The area of the room in which maintenance is made shall be in line with the nameplate. • Continuous ventilation shall be maintained during maintenance. •...
- Page 10 Safety Principles • During product maintenance, favorable ventilation shall be guaranteed at the maintenance site, and the close of all the doors/windows is not allowed. • Operation with open fire is not allowed, including welding and smoking. The use of phones is also not allowed.
-
Page 11: Scrapping And Recovery
Removal and Vacuumizing The maintenance or other operations of the refrigeration circuit shall be made as per conventional procedures. Moreover, the flammability of refrigerant shall also be mainly considered. The following procedures shall be followed: • Refrigerant clearing; • Pipeline purification with inert gas; •... - Page 12 In case the vacuum state cannot be reached, vacuumizing shall be carried out from numerous positions, to pump the refrigerant in each part of the system out; It shall be guaranteed that the capacity of cylinders is sufficient before recovery; The recovery equipment shall be started and operated as per the operation instructions of the manufacturer;...
-
Page 13: Indoor/Outdoor Unit Installation Drawings
Indoor/Outdoor Unit Installation Drawings The models adopt HFC refrigerant R32. For installation of the indoor units,refer to the installation manual which was provided with the units. (The diagram shows a wall-mounted indoor unit.) Attention must be paid to the rising up of drain hose more than 15cm Optional parts for piping Non-adhesive tape... - Page 14 Indoor/Outdoor Unit Installation Drawings The models adopt HFC refrigerant R32. For installation of the indoor units,refer to the installation manual which was provided with the units. (The diagram shows a wall-mounted indoor unit.) Attention must be paid to the rising up of drain hose more than 15 cm Optional parts for piping Indoor unit A...
-
Page 15: Safety Precautions
WARNING CAUTION Open the window and well ventilated the room explosion-proof fuse... - Page 16 fire or explosion. fire or explosion. , fire or explosion will be caused. fire or explosion. , fire or explosion. ,fire,explosion.
- Page 18 Install a explosion-proof breaker for current leakage at the power source to avoid the risk of the electric shock. Without a breaker for current leakage will cause risks of electric shock, fire or explosion. Do not use large-capacity fuses,steel wire,or copper wire. Damaging the unit ,fire,smoke or explosion will be caused otherwise.
- Page 21 410A...
- Page 22 Air outlet Wind direction Cushion rubber 4.Installation dimension(Unit:mm) Model GES-NIG25OUT 540 500 140 256 GES-NIG35OUT 550 510 130 313 540 500 140 256 GES-NMG25OUT GES-NMG35OUT 550 510 130 313 550 510 130 313 GES-NMG50OUT 697 628 130 355.5 GES-NMG70OUT GES-NJG25OUT...
- Page 23 GES-NJG25OUT GES-NIG25OUT 6.35x0.65mm GES-NJG35OUT GES-NIG35OUT GEM-NM40OUT M GES-NMG25OUT 9.52x0.65mm GEM-NM50OUT M GES-NMG35OUT GES-NMG50OUT 6.35x0.65mm GES-NMG70OUT GES-NJG50OUT 12.7x0.7mm Connection of pipes To bend a pipe, give the roundness as large as possible not to crush the pipe , and the bending radius should be 30 to 40 mm or longer.
- Page 25 (R32) (R32)
- Page 26 GES-NIG25OUT GES-NMG25OUT GES-NJG25OUT GES-NIG35OUT GES-NMG35OUT GES-NJG35OUT GES-NMG50OUT GES-NJG50OUT GES-NMG70OUT GEM-NM40OUT M GEM-NM50OUT M ceramic type of T 25A/250V. The explosion-proof breaker of the air conditioner should be all-pole switch. The distance between its two contacts should not be no A explosion-proof breaker must be installed.
-
Page 27: Outdoor Unit Troubleshooting
GEM-NM50OUT M GEM-NM40OUT M Outdoor unit A POWER To Indoor unit A GEM-NM40OUT M Model Outdoor unit B GEM-NM50OUT M Outdoor unit A Outdoor unit B To Indoor unit A DOUBLE Connecting wiring 4G1.0 mm To Indoor unit B DOUBLE Power cable 3G2.5 mm To Indoor unit B...