Advertisement
Setup, Workout Tips and Care & Safety Guide
Please read before setting up or using your Ultimate Balance Ball® Chair.
PARTS INCLUDED
Letter
Part
A
B
C
D
1
STEP 1
STEP 1
Castor
Castor
F
Pentagram stand
Pentagram stand
Impress the casters into the appropriate
holes of the pentagram stand.
STEP 5
ess the castors into the appropriate holes of the pentagram stand
Impress the castors into the appropriate holes of the pentagram stand
screw set:
STEP 5
M6 screw*4/ springwasher*4/flatwasher*4
Screw 4 • Springwasher 4 • Flatwasher 4
screw set:
L
K
J
G
Use tube fixers and screw sets to fix bars on the chair base
Use tube fixers and screw sets to fix
bottom. Fasten screw sets.
bars on the chair base bottom. Fasten
screw sets.
Learn more at gaiam.com
Balance Ball® colors and chair design will vary from images shown in the guide. The Ultimate Balance Ball® Chair is designed for persons up to 5'11" tall.
Perform movements to the best of your ability without strain. See the Care and Safety guide included with the chair for details. Maximum weight 300 lbs.
© & TM 2018 Gaiam Americas, Inc. All Rights Reserved. Manufactured and distributed under license by Fit for Life LLC, Louisville, CO 80027-2452
Ultimate Balance Ball® Chair U.S. Patent Pending. MADE IN CHINA.
ULTIMATE
BALANCE BALL
Name
Quantity
E
1
back /handle
F
1
chair base
G
1
bars
H
pentagram
1
stand
STEP 2
STEP 2
bars
A
D
Insert bars to the back seat unitl it
back handle
clips in.
STEP 6
Insert bars to the back sear, fasten the screw set when holes on the back
Insert bars to the back sear, fasten the screw set when holes on the back
screw set:
seat meets holes on the bars.
seat meets holes on the bars.
STEP 6
M6 screw*4/ springwasher*4/flatwasher*4
Screw 4 • Springwasher 4 • Flatwasher 4
screw set:
L
K
J
H
B
Use the screw sets to fix the connector into the middle of the
Use the screw sets to fix the
chair base bottom.
connector into the middle of the
chair base bottom.
balance ball
caster
tube fixer
connector
STEP 2
STEP 3
STEP 3
bars
C
Insert bars into chair base until
back handle
reaching base bottom.
Insert bars into chair base until reaching base bottom
STEP 7
L
K
STEP 7
J
screw sets
conect
cover plate
I
or
B
Insert the stand into connector,
press hard (or press with a hammer),
Insert the stand into connector ,press hard(or press with a
then add the cover plate onto it and
hammer),then add the cover plate onto it and use the screws sets to fix it
well.
use the screw sets to affix it.
®
CHAIR
1
I
5
J
2
K
1
L
STEP 4
C
B
Pay attention to where the bars'
location is after assembling, and try to
keep both bars at same end.
STEP 8
STEP 8
After assembling the chair, check if all
parts are put together correctly. Place
After finishing assembling，place properly the chair and check if all parts
the inflated Balance Ball in the base of
are assembled correct，once confirm you can put the inflated gymball
the chair and assembly is complete.
onto it. Then installation complated.
1
cover plate
9
flat washer
spring
9
washer
9
screw
bars location after
assembling
chair
gymball
05-63057CARE
Advertisement
