Removing the Processor
1.
Perform the "Removing the Heat Sink Fan (HSF) Assembly" procedure on page 54.
2.
Use a flat screwdriver to turn the processor socket lock counter-clockwise to the unlock position.
Torque: 2.5 kgf-cm
3.
Hold the processor by its edges and carefully remove it from its socket.
CAUTION: DO NOT lay the processor on its base to avoid bending or damaging the pins underneath it.
IMPORTANT: When installing a processor, note the golden arrow on the corner to make sure the processor is
properly oriented over the socket.
Acer Aspire 3935 Service Guide
55