Installation Functions; External Static Pressure) Setting - LG AMNW07GSJA0 Svc Manual

4. Installation Functions

4.1 E.S.P. (External Static Pressure) Setting
This function is applied to only duct type. Setting this in other cases will cause malfunction.
<Static Pressure Setting Table>
Pressure selection
01
02
03
04
Press
1
setting mode until timer segment displays "01:01".
If pressing
2
selection menu as picture below.
3
Select static pressure by pressing
(01:V-H, 02:F-H, 03:V-L, 04:F-L)
Function Code
Press
4
5
Pressing
After setup, it automatically gets out of setup mode if there is no button
input for 25 seconds.
When exiting without pressing set button, the manipulated value is not
reflected.
Zone state
V-H
F-H
V-L
F-L
- 49 -
button for 4 seconds to enter the installer
button repeatedly, it moves to static pressure
Pressure
button to save.
button will exit settings mode.
Function
Variable
Fixed
Variable
Fixed
Copyright © 2016 - 2020 LG Electronics Inc.
All rights reserved. Only training and service purposes.
Part 2 Functions & Controls
button.
ESP standard value
High
High
Low
Low