Table of Contents
Advertisement
2.7.2
Redundant power supply units
We recommend that you use both of your hands in performing the following steps.
To replace a power supply unit (PSU):
1.
Lift up the PSU lever.
2.
Hold the PSU lever, press the PSU latch (A) then carefully pull the PSU out of the
system chassis (B).
PSU lever
3.
Prepare the replacement PSU.
4.
Align and insert the replacement PSU into the empty PSU bay until it clicks in place.
2-34
Replacement PSU
Chapter 2: Hardware Setup
Advertisement
Table of Contents
