Table of Contents
Advertisement
WashOnly
Press the Wash
button.
Rinse and spin are
automatically
selected.
Press the Rinse
and Spin buttons
until the rinse
and spin functions
are cancelled.
Press the START/PAUSE buttons to start the cycle(s).
WashandRinse
and
Press the Wash
button.
Press the Spin button
until the spin function
is cancelled.
Press the Wash & spin
button to select the
desires Wash & Rinse
cycles.
Press the START/PAUSE buttons to start
the cycle(s).
• When you set a washing cycle manually such as rinse only, wash only or wash and rinse, the water will not be drained out after
the wash is completed. If you wish to drain the water, select a spin only cycle after the wash has completed.
• If a rinse only cycle is selected, the water supply begins after detecting the load and the cycle will start.
However the water will still fill to the selected water level even if there is water already in the tub.
• If you do not select or change the Water Level, the water level will be set automatically.
RinseOnly
Press the POWER button.
Press the Rinse
button.
Press the Spin
button untill the spin
function is cancelled.
Press the Rinse
button to adjust the
number of rinses.
RinseandSpin
Press the POWER button.
Press the Rinse
button.
Rinse and spin are
automatically
selected.
Press the Rinse or
Spin buttons to
select the desired no.
of rinse and spin
cycle.
23
SpinOnly
Press the Spin
button.
Press the Spin button
to adjust spin
strength.
DrainOnly
Press the Spin
button.
Press the Start/Pause
button.
Wait until the
water in the
washing tub drains
completely.
Press POWER button
to turn off washer.
Advertisement
Table of Contents
