Dynamic Display Reassignment; Ati Color Tab - ATI Technologies FireGL V5100 User Manual

1
Click the enable/disable button
want to have active.
2
Type a name into the Scheme drop-down list field.
3
Click Save to save the scheme.

Dynamic Display Reassignment

You can change the assignment of your Primary and Secondary display on
the fly, without rebooting. If you have more than one display device
available and have the proper adapters or connectors, you can plug it in to
your FireGL™ V5100 graphics card in order to view or extend your
desktop display to that device.
Note: Before you can change the assignment of the Primary display,
at least one Secondary display and the Extended Desktop mode must
be enabled. Extended Desktop mode is enabled through the
Windows® Display Property dialog, under Settings . For more
information, consult your Windows® documentation .
To assign your Primary monitor
1
Click the buttons to assign the Primary monitor:
• Clicking the
monitors. Clicking the
of the Primary display onto the Secondary display.
2
Click OK or Apply to save the changes.

ATI Color Tab

The ATI Color tab allows you to configure Gamma, Brightness, and
Contrast color settings for both your desktop and full screen 3D
environments. You can also save settings to a color profile for easy recall.
In addition, you can assign unique hotkey combinations that allow you to
adjust Gamma, Brightness, and Contrast color settings within your full-
screen 3D applications.
button will reassign the Primary and Secondary
button creates a clone or mirror image
ATI Color Tab 17
for the display devices you