1. Manuals
  2. Brands
  3. Analog way Manuals
  4. Keypad
  5. Shot Box 2
  6. Quick start manual

Analog way Shot Box 2 Quick Start Manual

For livepremier and midra 4k
Hide thumbs
1
2
3
4

Advertisement

Table of Contents

QUICK START GUIDE
Shot Box
2
- Ref. SB80-2
For LivePremier™ and Midra™ 4K
Thank you for choosing
Analog Way
control your live events using the Shot Box² with the LivePremier™ series and the Midra™ 4K series.
WHAT'S IN THE BOX
• 1 x SB80-2 Shot Box²
• 1 x Carrying case
• 1 x Quick start guide*
* User Manuals and Quick Start Guides are also available on

OVERVIEW

The Shot Box² is can be used to operate your LivePremier™ series or Midra™ 4K series with ease and comfort using
76 physical key buttons to load instantly up to 140 memories.
The Shot Box² can be used via direct connection on the device USB port (one USB controller maximum).
With the software AW Shotbox Control, it can also be used when connected to a computer on the same network
as the LivePremier™ or Midra™ 4K device.
Note: One computer with AW Shotbox Control can only support one USB controller. One device supports up to 3
USB controllers connected via different computers + 1 USB controller connected on the device USB port.

SYSTEM REQUIREMENTS FOR AW SHOTBOX CONTROL

Windows: Microsoft® Windows® 10 or above, 100 MB of available hard-disk space for installation
LAN connection
macOS: macOS X v10.15 or above, 100 MB of available hard-disk space for installation.
LAN connection
- LivePremier™ firmware version 2.2 or above.
- Midra™ 4K firmware version 1.3 or above.
and the Shot Box². By following these simple steps, you will be able to easily
Register
your product
www.analogway.com
Go on our website to register your product(s)
and be notified about new firmware versions:
http://bit.ly/AW-Register

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Shot Box 2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Analog way Shot Box 2

Summary of Contents for Analog way Shot Box 2

  • Page 1 For LivePremier™ and Midra™ 4K Thank you for choosing Analog Way and the Shot Box². By following these simple steps, you will be able to easily control your live events using the Shot Box² with the LivePremier™ series and the Midra™ 4K series.
  • Page 2 CONNECT VIA AW SHOTBOX CONTROL Using AW Shotbox Control is only required when the Shot Box² is connected to a computer on the same network as the device. If the Shot Box² is connected directly on the device USB port, skip to the next page. Go to www.analogway.com to find the latest version of the AW Shotbox Control installer.
  • Page 3 USE THE SHOT BOX² Once the controller is properly connected, each individual key LED backlight will reflect the corresponding memory availability on the system: If a memory key backlight is turned off, this means that the corresponding memory is empty. Set the controller on the device Front panel 1.
  • Page 4 SHOT BOX CARRYING CASE WARRANTY AND SERVICE This Analog Way product has a 1 year warranty on parts and labor (back to factory). This warranty does not include faults resulting from user negligence, special modifications, electrical surges, abuse (drop/crush), and/or other unusual damage.

This manual is also suitable for:

Sb80-2

Table of Contents