Casio CELVIANO GP-510 User Manual page 51

Display Text
*
Master EQ
Factory Reset >Ent
Version
MIDI >Ent
Local Control
Keyboard CH
Hi-Res Vel Out
USB Flash >Ent
Load >Ent
Save >Ent
Delete >Ent
Rename >Ent
Format >Ent
Description
Master Equalizer. Configures master equalizer
characteristic settings to adjust timbre.
• Speaker: Optimizes timbre for built-in speaker
output.
• Line Out: Optimizes timbre for line output.
Return system to initial factory defaults.
Shows the version of the firmware.
MIDI parameters
Local Control. Selecting "Off" for Local Control
cuts off the Digital Piano's sound source, so no
sound is produced by the Digital Piano when keys
are pressed.
• Performing certain Digital Piano operations
may cause Local Control to turn on
automatically.
Send channel. Specifies one of the MIDI channels
(1 through 16) as the Send Channel, which is used
for sending MIDI messages to an external device.
High-Resolution Velocity MIDI Out on/off .
Enables/disables high-resolution MIDI output of
touch pressure (velocity) when keyboard keys are
pressed or released.
• Turning on this setting outputs to MIDI OUT
high-resolution velocity information that
corresponds to the MIDI standard high-
resolution velocity prefix.
• Turning off this setting disables MIDI OUT
output of high-resolution velocity information.
In this case, normal 127 level velocity is output
to MIDI OUT.
• The on/off setting of this item is applicable to
MIDI output to the MIDI OUT terminal and
USB port only. The Digital Piano's internal
sound source always generates high-resolution
velocity regardless of the on/off setting of this
item.
USB flash drive parameters
Load data from USB flash drive into Digital Piano
memory.
Save data from Digital Piano memory to USB flash
drive.
Delete data from USB flash drive.
Rename file on USB flash drive.
Format USB flash drive.
Configuring Digital Piano Settings
Go here for more
Settings
information
Speaker, –
Line Out
– Returning the Digital Piano to
Its Factory Default Settings
(page EN-7)
– –
Off
(Disabled),
On
(Enabled)
1 to 16
Off
(Disabled),
On
(Enabled)
– Loading USB Flash Drive
Data into Digital Piano
Memory (page EN-56)
– Saving Digital Piano Data to a
USB Flash Drive (page EN-55)
– Deleting USB Flash Drive File
(page EN-57)
– Renaming a USB Flash Drive
File (page EN-57)
– To format a USB flash drive
(page EN-54)
EN-49