Table of Contents
Advertisement
Configuring Digital Piano Settings
Display Text
Scene >Ent
Write >Ent
Clear >Ent
General >Ent
LCD Contrast
Auto Resume
Auto Power Off
Operation Lock
*
Half Pedal Pos.
Headphone Mode
Volume Sync EQ
*
Speaker Out
EN-48
Description
Scene parameters
Save user scene.
Clear user scene.
Other Digital Piano parameters
Digital Piano display contrast
Digital Piano setup backup. When this setting is
enabled, the Digital Piano remembers its current
settings when it is turned off, and restores them
the next time power is turned on.
• The settings below are not remembered.
Song part (LR) selection, Operation lock, Local
Control, Concert Play song mode (LISTEN,
PLAY), Concert Play song tempo, Speaker Out,
Master EQ
Auto Power Off
Operation lock. Enable this setting when you want
to protect against unintentional button operations.
When this setting is turned on, the Digital Piano's
buttons (except for the P (Power) button and
buttons required for unlock) are locked, so no
operation can be performed.
Half pedal position
Headphone mode. The Headphone Mode
automatically performs timbre compensation
while headphones are being used to reproduce the
natural expanse of sound that reaches the ears
when an acoustic piano is played. The initial
default setting is "On".
• On: Enabled; Off: Disabled
Volume sync equalizer. Automatically performs
timbre compensation in accordance with the
volume level. This feature ensures that low range
and/or high range sounds are easier to hear, even
at low volume levels. The initial default setting is
"Normal".
• Off: Compensation disabled;
Weak: Weak compensation;
Normal: Normal compensation;
Strong: Strong compensation
• This function is intended for use with sound
output by the Digital Piano's speakers.
• Compensation is not performed while the
Master EQ setting is Line Out.
Speaker Out. Specifies whether sound should be
output from the built-in speakers.
• Auto: Enables built-in speaker output.
Speaker output is disabled while
headphones are connected.
• Off: Disables built-in speaker output.
Go here for more
Settings
information
–
Saving a User Scene (page
EN-27)
–
Deleting a User Scene (page
EN-28)
(See the page
Adjusting Display Contrast
to the right.)
(page EN-7)
Off
–
(Disabled),
On
(Enabled)
(See the page
Auto Power Off (page EN-6)
to the right.)
Off
–
(Disabled),
On
(Enabled)
(See the page
To adjust the half pedal
to the right.)
trigger position (page EN-12)
Off
–
(Disabled),
On
(Enabled)
Off
–
(Disabled),
Weak,
Normal,
Strong
Auto,
–
Off
(Disabled)
Advertisement
Table of Contents
