Table of Contents
Advertisement
06 Starting and driving
Blind Spot Information System (BLIS)*
The vehicle's own shadow against a large, light,
smooth surface such as barriers between lanes on
a highway
Sunlight directly in the camera when the sun is low
on the horizon
06
Cleaning the BLIS camera lenses
In order to function optimally, the BLIS camera
lenses must be kept clean. They can be wiped
clean with a soft cloth or wet sponge.
*
166
Option/accessory, for more information, see Introduction.
CAUTION
•
Clean the lenses carefully to avoid
scratching.
•
The lenses are electrically heated to
help melt ice or snow. If necessary, gen-
tly brush away snow from the lenses.
Switching BLIS on and off
BLIS button (forward button in the illustration)
BLIS is automatically activated when the igni-
tion is switched on. The indicator lights will
provide confirmation by flashing 3 times.
•
The system can be switched off by press-
ing the BLIS button in the center console.
The indicator light in the button goes out
when the system is switched off, and a text
message is displayed.
•
BLIS can be switched on again by pressing
the button. The indicator light in the button
will illuminate and a new text message will
be displayed. Press the READ button, see
page 57, to erase the message.
BLIS system messages
Text in the
System status
display
BLIS not functioning
BLIS SERVICE
REQUIRED
properly. Contact an
authorized Volvo serv-
ice technician.
BLIS camera obscured.
BLIS CAMERA
BLOCKED
Clean the lenses.
BLIS system on
BLIS ON
Advertisement
Table of Contents
