Volvo 2010 V50 Owner's Manual page 248

10 Audio
Radio functions
When the search is completed,
STORING will no longer be displayed. If there
10
are no stations with sufficient signal strength,
NO AST FOUND is displayed.
The auto-stored stations can be selected using
the preset buttons (2).
±
Press EXIT (6) to terminate the automatic
storing function.
When the radio is in auto-store mode,
shown in the display. AUTO
you return to normal radio mode, which can be
done by briefly pressing AM/FM (1), EXIT (6),
or AUTO (7).
To return to the Auto-store mode, press the
AUTO button briefly and select a stored station
by pressing one of the preset buttons (2).
Saving auto-stored stations in the preset
memory
An auto-stored station can be saved in the
memory for manually preset stations.
1. Press AUTO (7) briefly.
> Auto is displayed.
2. Press one of the preset buttons (2) under
which the station is to be stored. Hold
248
AUTO down the button until
STORED
The radio will then exit auto-store mode and
the stored station can be selected by pressing
the preset button.
Scanning
SCAN (4) automatically searches through the
selected waveband for strong AM or FM sta-
AUTO is
tions. When the radio finds a station, that sta-
disappears when
tion will be played for approximately 8 sec-
onds, after which scanning resumes.
Activating/deactivating SCAN
1. Select radio mode using the AM/FM but-
ton (2).
2. Press SCAN to activate the function.
SCAN
3. Press the SCAN or EXIT button to deacti-
vate the scan function and listen to the
selected station.
Storing a station found with SCAN
A station can be stored as a preset while the
SCAN function is activated.
±
Press one of the preset buttons (2) under
which the station is to be stored. Hold
STATION
is displayed.
is shown in the display.
down the button until STATION
STORED is displayed.
The SCAN function will be deactivated and the
station can be selected by pressing the preset
button.
Radio text
Certain stations broadcast program informa-
tion, which can be shown in the display.
To start this function:
1. Select
FM1 or FM2 and press the MENU
button.
2. Press ENTER.
3. Select
RADIOTEXT in the menu and press
ENTER.
To deactivate this function, select
RADIOTEXT again and press ENTER.